|
Mold Glossary
The following are some basic terms to help better understand the mold issue.
Allergen
An allergen is a substance that elicits an antibody response and is responsible for producing allergic reactions. Chemicals are released when certain cells come into contact with an allergen. These chemicals can cause injury to surrounding tissue - the visible signs of an allergy. Only a few fungal allergens have been characterized but all fungi are thought to be potentially allergenic.
Biocide/Fungicide
Biocides and fungicides are chemicals that limit the growth of or kill microorganisms such as fungi.
Black Mold
See Toxic or Black Mold below.
Causation
The issue that originally caused the mold colonization needs to be addressed and corrected to assure mold colonization will not return.
Certified Water Damage Technicians
Personnel who have attended the required education classes and passed the required test to become Certified by the IICRC organization in Water Damage Restoration
Certified Mold Remediation Technicians
Personnel who have attended the required education classes and passed the required test to become Certified by the nationally recognized IICRC organization in Mold Remediation
Condensation (Dew)
Water vapor from air which naturally condenses on cold surfaces into liquid water is called dew. Water vapor will only condense onto another surface when that surface is cooler than the temperature of the water vapor, or when the water vapor equilibrium in air, i. e. saturation humidity, has been exceeded.
Foaming
With the use of commercial foam machine the solution is transformed into a foam which slowly dissolves and penetrates into the soil or substrate killing all bacteria, viruses mold and all other toxic organisms.
Fogging
With a commercial fogging machine produces an aerosolized fog with particulate sizes ranging from 5 to 20 microns. This method is particularly effective in the decontamination of mold-affected areas because it allows the chemical to linger in the air longer and thus is able to decontaminate not only all of the exposed surface areas but all of the air space as well. It bonds with the mold spores which range in size from 5 to 15 microns to more effectively eliminate them. This means all areas are treated at once thus ensuring complete decontamination. The fog droplets penetrate deep into nooks and crannies where other sprays and foams can’t go.
French Drain
A French drain or land drain is a ditch filled with gravel, rock that redirects surface and ground water away from an area. French drains are common drainage systems, primarily used to prevent ground and surface water from penetrating or damaging building foundations. Alternatively, the French drain technique may be used to distribute water, such as that which flows from the outlet of a typical septic tank sewage treatment system. French drains are also used behind retaining walls to relieve ground water pressure.
Fungi
Fungi are neither animals nor plants and are classified in a kingdom of their own, the Kingdom of Fungi. Fungi include a very large group of organisms, including molds, yeasts, mushrooms and puffballs.
Hidden Mold
 This refers to visible mold growth on building structures that is not easily seen, including the areas above drop ceilings, within a wall cavity (the space between the inner and outer structure of a wall), inside air handlers, or within the ducting of a heating/ventilation system.
Hypha (plural, hyphae) 
An individual fungal thread or filament of connected cells; the thread that represents the individual parts of the fungal body. Microbial Volatile Organic Compounds (MVOCs) Fungi produce chemicals as a result of their metabolism. These chemicals, MVOCs, are responsible for the characteristic moldy, musty, or earthy smell of fungi, whether mushrooms or molds. The human nose is very sensitive to mold odors and sometimes more so than current analytical instruments.
Hypersensitivity Pneumonitis
An inflammation of the alveoli within the lung caused by hypersensitivity to inhaled organic dusts or molds. Sufferers are commonly exposed to the dust by their occupation, hobbies or can receive a on time hiigh dose of toxic exposure.
Institute of Inspection Cleaning and Restoration Certification (IICRC)
The IICRC is a nationally recognized Education, Training and Certification Organization. They were instrimental in developing the Standards for both Water Restoration (S-500) and Mold Remediation (S-520). Learn more at www.iicrc.org.
Mold
Molds are a group of organisms that belong to the Kingdom of Fungi (see Fungi). Even though the terms mold and fungi had been commonly referred to interchangeably, all molds are fungi, but not all fungi are molds.
Mold as a result of Condensation
These are surface issues as a result of condensation (high levels of humidity condensate on the exterior walls where there is little or no air movement) which could be cleaned up under conventional methods, however, not all the mold present under these conditions maybe visible. Mold spores could be present in the carpeting, soft contents, clothing, etc. and just because the visible area was cleaned up doesn’t mean the mold will not come back. The causation issue (normally humidity) needs to be addressed to assure it will not return.
Mold Colonization
Active mold growth as a result of water leaks, sewer leaks, wet crawl spaces or attics and even high levels of humidity.
Mycelium
A mass of hyphae.
Mycotoxins
Mycotoxins are compounds produced by some fungi that are toxic to humans or animals.
Negative Air Unit / Air Scrubber
These machines are interchangable depending on how they are set up. The NAU will extract the air from a workspace and discharge it outside the workspace creating a negative pressure, an AS circulates the air within a worksapce, in both cases the air is filtered thru a 3 stage filtration system consisting of a primary, a secondary and a HEPA collectively removing 99.97% of the airborne particles from the air down to 3 microns.
Relative Humidity
A term used to describe the amount of water vapor that exists in a gaseous mixture of air and water, expressed as a percentage of the maximum amount of water vapor that could be present if the vapor were at its saturation conditions. For example: 70% relative humidity @ 80° means that the air can only hold an additional 30% more water vapor before it reaches its saturation point.
Remediate 
The term "remediate" simply means to fix a problem. Related to mold contamination, remediation includes fixing the water/moisture problem, and the cleaning, removal and/or replacement of damaged or contaminated materials.
Remediation
A controlled professional activity to physically remove the contamination, clean and treat the surfaces, scrub the air with HEPA filtration devices and to assure that the living environment has been brought back to acceptable healthy levels.
Specific Humidity
The weight of water vapor per unit weight of air expressed as grams of water vapor /pound of air or GPP. This method of measuring humidity is much more precise and useful when applying structural drying or trying to identify a humidity issue.
Spore 
General a term for the reproductive structure in fungi, bacteria and some plants. In fungi, the spore is the structure which may be used for dissemination and may be resistant to adverse environmental conditions.
Stachybotrys
Stachybotrys is a genus that includes approximately 10 species. These species occur mainly on dead plant materials. Of these, Stachybotrys chartarum is the most common. In the indoor environment, it is commonly found on cellulose materials including paper, canvas and jute which are wetted to a water activity > 0.98. This is a toxigenic mold.
Toxic or Black Mold
 Toxic mold or Black Mold is a misnomer, yet it is commonly referred by consumers who use these terms to identify what it is they are trying to describe. Mold can be any color and usually takes on the color of the food source it is digesting. Stachybotrys is one of the mold spores that are associated with the “toxic or black mold” terms. One of the reasons is Stachybotrys takes longer to cultivate and needs a higher concentration of moisture over a longer period of time so it can look gooey and black.
Unprofessional Remediation
Attacking mold contamination with a bottle of Clorox (or any disinfectant) will do more harm than good. Consider a dandelion flower when you blow on it the seeds fly away and your left with the stem, spraying Clorox on a mold colony will get some of the spores and the stem structure but the majority of the spores just drift off to settle in other areas. The relocated spores do not die just become dormant.
Wiping
Wipe hard surfaces with a microfibre wipe wetted with decontaminate solution.
Mold Glossary courtesy EMLab P&K
Contact us today to learn more.
|
|
Aspergillus is the asexual stage of a number of species of Aspergillus. These are distributed worldwide although they are somewhat more common in warmer climates. These species grow on a vast array of organic materials. Many species are cosmopolitan. Species of Aspergillus include several of considerable economic importance: A. flavus is the main producer of the potent carcinogen aflatoxin & A. fumigatus is an important cause of the invasive disease aspergillosis.
Cladosporium is a genus comprising approximately 500 species most of which are saprophytes or plant pathogens of which perhaps 20 are common. All are found on plants, wood, wood pulp, textiles and food. Cladosporium produces a wide variety of allergens and approximately 10% of the population is sensitized to Cladosporium.
Penicillium is the asexual stage of a number of species of Penicillium that are distributed worldwide although they are somewhat more common in temperate climates. These species grow on a vast array of organic materials. Many species are cosmopolitan. Species of Penicillium include several of considerable economic importance: P. chrysogenum produces penicillin. Many Penicillium species cause damage in damp building materials including the production of a toxigenic species.